Featured article
Flowmeter Selection
Before You Ask for a Flowmeter Quote, Prepare These 8 Site Details
A practical checklist for sharing media, pipe size, flow range and operating conditions before quotation.
Read articleRESOURCES
Flow Measurement Resources
Practical notes for selecting flowmeters by media, site conditions and industrial utility systems.
Flowmeter Selection
How to Approach Flowmeter Selection When Site Conditions Are Messy
A field-first guide to selecting meters when pipe layout, media behavior and signal needs are not simple.
Read article
Installation Notes
If You Are Retrofitting a Flowmeter, Send Pipe Photos Before the Quote
Why retrofit inquiries should include pipe photos, access limits and installation context before pricing.
Read article
Calibration
Before You Approve the Flowmeter, Ask How the Number Was Proven
Questions to ask about calibration, site conditions and signal use before approving a flowmeter.
Read article
Application Notes
If Your Plant Does Not Trust the Flow Data, the Flowmeter Has Already Failed
Why flow data must be trusted by operators before it can support control, reporting or energy review.
Read article
Steam Flow Measurement
Vortex Flowmeter Selection for Complex Steam, Gas and Liquid Lines
Where vortex flowmeter selection fits steam, gas and liquid lines with changing process conditions.
Read article
Signal Integration
If the PLC Cannot Read the Number Cleanly, the Flowmeter Project Is Not Finished
Why output signal and control system requirements should be confirmed before startup.
Read article
Steam Flow Measurement
Before You Blame the Steam Meter, Check These Site Conditions
A practical steam measurement check before blaming the meter for unstable or disputed readings.
Read article
Application Notes
The Flowmeter Is Not the Problem. Uncertainty Is.
How to start flowmeter selection from the process uncertainty the plant needs to remove.
Read article
Flowmeter Retrofit
How to Select a Retrofit Flowmeter When the Pipe Cannot Be Cut
A practical guide to no-cut retrofit flowmeter selection for existing plant pipelines.
Read article
Steam Flow Measurement
Steam Flow Meter Troubleshooting Starts With the Measurement Point
Steam reading disputes often begin at the measurement point.
Read article
Pharmaceutical Utilities
Pharma Utility Flow Measurement: Turning Facility PreCheck Into Design Evidence
Early utility flow planning supports pharma facility readiness.
Read article
Chemical Process Flow Measurement
DLE Brine Flow Measurement: Turning Direct Lithium Extraction Into a Controlled Continuous Process
Controlled brine flow supports stable DLE plant operation.
Read article
Industrial Decarbonization
Cement Carbon Capture Flow Measurement Starts With Plant Utilities
Plan utility measurement before cement carbon capture retrofit.
Read article
Data Center Cooling
Data Center Commissioning Water Flow Measurement: Build a Clear Fill-and-Flush Record
Track commissioning water from fill through final discharge.
Read article
Food and Beverage Flow Measurement
Flowmeter Sizing for Food Plant Commissioning and Full Production
Size for startup flow and future production.
Read article
Process Automation
Flowmeter Data Quality Starts at the Measurement Point
Flowmeter data quality begins at the measurement point.
Read article
Mining & Mineral Processing
How Concentrator Expansion Changes Slurry Flow Measurement Downstream
Recheck slurry and water flow ranges before concentrator expansion.
Read article
Application Notes
Semiconductor Water Flow Measurement Starts with Clear Source-to-Fab Boundaries
Measure every boundary before expanding semiconductor water supply.
Read article
Data Center Cooling
Data Center Water Recovery Needs Visible Backwash and Reject Flows
Backwash and reject flows reveal actual water recovery.
Read article
Flowmeter Selection
Vortex Flowmeter for Steam: What to Check Before Selection
Steam vortex selection starts with actual operating conditions.
Read article
Application Notes
Semiconductor Gas Flow Measurement Needs Separate Delivery and Consumption Boundaries
Separate gas delivery from fab consumption boundaries.
Read article
Flowmeter Retrofit
Temporary Wastewater Flow Measurement for Brownfield Plant Upgrades
Map temporary flows before staged wastewater upgrades begin.
Read article
Flowmeter Selection
Full Fab Utilization Changes Semiconductor Utility Flowmeter Sizing
Full utilization reshapes minimum, normal, and peak utility flow.
Read article
Industrial Decarbonization
Blast Furnace Gas Flow Measurement: Where Does the Fuel Boundary Begin?
Define the BFG fuel boundary before flowmeter selection.
Read article
Industrial Decarbonization
Shared CCS CO₂ Measurement: Define the Basis Before Streams Combine
Align CO₂ measurement before shared streams are combined.
Read article
Flowmeter Selection
Slurry Flowmeter Selection Before and After Precipitation
Precipitation changes medium conditions and flowmeter selection requirements.
Read article
Steam Flow Measurement
Waste-to-Energy Steam Flow Measurement: Why Waste Tonnes and Energy Output Differ
Waste tonnes and steam output measure different plant realities.
Read article
Chemical Process Flow Measurement
Flowmeter Sizing for Multi-Product Chemical Service: Which Condition Should Define the Meter?
Size flowmeters around the complete multi-product operating envelope.
Read article
Application Notes
Gas Flow Measurement During Commissioning: Process Proving vs Commercial Delivery
Separate process proving from commercial gas measurement before selection.
Read article
Flowmeter Retrofit
Gas Flow Measurement After LNG Feed Composition Changes
Gas composition changes can alter an existing measurement basis.
Read article
Flowmeter Selection
Reclaimed Water Flowmeter Selection: Recheck Conductivity as Water Gets Cleaner
Cleaner reclaimed water can change flowmeter selection.
Read article
Steam Flow Measurement
Steam Flowmeter Sizing: Production Capacity Does Not Size the Meter, Steam Demand Does
Steam demand should define the meter sizing range.
Read article
Application Notes
RO Train Flow Measurement: Why Plant Capacity Does Not Show Each Train’s Load
Plant totals cannot reveal individual RO train hydraulic loading.
Read article
Flowmeter Selection
Hydrogen Flowmeter Selection for 10% to 100% Electrolyzer Load
Flexible hydrogen operation changes the flowmeter sizing basis.
Read article
Flowmeter Selection
548,000 bpd of Gross Fluids Is Not One Flow: Produced Water Flow Measurement After Separation
Size produced-water meters from separated-stream operating envelopes.
Read article
Mining & Mineral Processing
Mine Water Flow Measurement: Below 2 ppb Selenium, But How Much Actually Leaves the Plant?
Match concentration and discharge flow to quantify selenium load.
Read articleSelection support
Send Site Details for a Better Recommendation.
Share the fluid, pipe size, flow range, pressure, temperature and application background. Velomac will review the conditions and suggest the next step.